Multistore COMPACT MAXI-400J3, Руководство по сборке, Страница: 4 / 7

STEP 2.
GRAB YOUR FIRST SIDE AND INSERT YOUR CAMS INTO THE HOLE PROVIDED ON THE OUTSIDE OF THE DRAWER SIDE
GENTLY AS PER INSTRUCTIONS BELOW.
IMPORTANT NOTICE:
PLACE THE FITTING OVER THE HOLE KEEPING THE SQUARE
EDGE OF THE FITTING PARALLEL TO THE FACE OF THE BOARD,
KNOCK IN
CAREFULLY
.
3 x DRAWER ASSEMBLY INSTRUCTION
PUSH THE SIDE INTO THE FRONT DOWELS & PIN AND THEN CAREFULLY USING A
SCREW DRIVER TURN UNTIL IT LOCKS IN. REPEAT THIS PROCESS WITH THE OTHER
SIDE.
NOW PLACE YOUR LAST PIECE BETWEEN THE TWO SIDES USING THE SCREWS SUP-
PLIED SCREW INTO THE SIDES OF THE BACK DRAWER PIECE.
STEP 1.
LAYOUT YOUR DRAWER PIECES FLAT AS PER DESIGN WITH PRE -
DRILLED HOLES FACING UP.
START WITH THE BACK OF THE FRONT DRAWER AND PLACE YOUR
DOWELS & CAM PIN IN THE PRE
- DRILLED HOLES ON EITHER SIDE AS
INSTRUCTED BELOW
.
NO MODEL DESCRIPTION QTY
6 CAMS 6
7 CAM PINS 6
8 30mm 8 GAUGE SCREW 3
9 EURO SCREWS 12
10 HANDLE 3
11 RUNNERS PER SET 3
NO MODEL DESCRIPTION QTY
1 CONFIRMAT SCREWS 12
2 DOWELS 12
3 BACKING NAILS 60
4 5/8 X 6 WOOD SCREWS 18
5 INFILL 1