DCA10SPX4/DCA10SPXU4 — OPERATION AND PARTS MANUAL — REV. #0 (08/05/09) — PAGE 31
1
Normal Shutdown Procedure
To shutdown the generator use the following procedure:
1. Place both the
main
,
GFCI,
and
aux.
circuit breakers
as shown in Figure 20 to the
OFF
position.
2. Set the Speed Control Switch to the
START/IDLE
position as shown in Figure 22 and let the engine cool
for 3-5 minutes with no load applied.
3. Turn the ignition key counter-clockwise to the
STOP
position. When the engine has stopped, remove key.
Place key in a safe place where it will not be lost.
4. Inspect entire generator for any damage or loosening of
components that may have occured during operation.
DCA10SPX4/DCA10SPXU4 — GENERATOR SHUT-DOWN PROCEDURES
Emergency Shutdown Procedure
1. Turn the ignition key counter-clockwise to the
STOP
position. When the engine has stopped, remove key.
Place key in a safe place where it will not be lost.
2. Place both the
main,
GFCI,
and
aux.
circuit breakers
as shown in Figure 20 to the
OFF
position.
NEVER
stop the engine suddenly except in an emergency.
WARNING - SHUTTING DOWN THE GENERATOR
Содержание WHISPERWATT DCA10SPX4
Страница 3: ...DCA10SPX4 DCA10SPXU4 OPERATION AND PARTS MANUAL REV 0 08 05 09 PAGE 3 1 DCA10SPX4 DCA10SPXU4 NOTE PAGE...
Страница 15: ...DCA10SPX4 DCA10SPXU4 OPERATION AND PARTS MANUAL REV 0 08 05 09 PAGE 15 1 NOTE PAGE...
Страница 43: ...DCA10SPX4 DCA10SPXU4 OPERATION AND PARTS MANUAL REV 0 08 05 09 PAGE 43 1 DCA10SPX4 DCA10SPXU4 NOTE PAGE...
Страница 75: ...DCA10SPX4 DCA10SPXU4 OPERATION AND PARTS MANUAL REV 0 08 05 09 PAGE 75 1 NOTE PAGE...
