WBH-16 SERIES POWER BUGGY • OPERATION AND PARTS MANUAL — REV. #2 (09/12/19) — PAGE 21
OPERATION
6. If starting a warm engine or the temperature is warm,
place the choke lever (Figure 14) in the
OPEN
position.
Figure 14. Engine Choke Lever (Open)
7. Move the throttle lever halfway between the
FAST
and
SLOW
position (Figure 15) for starting.
Figure 15. Throttle Lever
CHOKE
LEVER
CLOSE
OPEN
THROTTLE
LEVER
FAST SLOW
8. Place the ignition key (Figure 16 ) in the
START
position
and hold it until the engine starts. When the engine
starts, release the key, allowing it to return back to the
ON
position.
Figure 16. Engine ON/OFF Switch
(Electric Start Models)
9. Make sure the choke lever has been placed in the
OPEN
position (Figure 14) before operating the power
buggy.
10. Place the throttle lever in the
FAST
position
11. Before the buggy is placed into operation, run the
engine for several minutes. Check for fuel leaks, and
noises that would associate with a loose guard or cover.
OFF O
N
S
T
A
R
T
Go to Discount-Equipment.com
to order your parts
