WALK-BEHIND TROWELS — HANDLE INSTALLATION INSTRUCTIONS P/N 20485 — REV. #4 (09/18/14) — PAGE 2
UNPACKING THE TROWE
This trowel is equipped with a folding upper handle (Figure 2).
The trowel is shipped with the handle in the folded or stowed
position.
1. To place the folding upper handle in the operational
position, simply turn the star wheel counterclockwise
to release it from its folded or stowed position.
2. Next, pull back on the upper handle and place handle in
the desired position. Turn star wheel clockwise to lock
handle in place. Make sure handle is locked firmly in
place so that the handle will not move or slip.
Figure 2. Unpacking the Trowel
FOLDED
POSITION
OPERATIONAL
POSITION
STAR WHEEL
UPPER
HANDLE
OPERATIONAL
POSITION
MAIN HANDLE TUBE INSTALLATION
1. Attach the main handle tube to the gearbox using the
supplied hardware as shown in Figure 3.
Figure 3. Handle Installation
2. The upper handle is already attached to the main
handle tube.
3. If readjustment is necessary, loosen the star wheel as
shown in Figure 4 and move the upper handle to the
desired position.
Figure 4. T-Handle Bar Adjustment
GEARBOX
3/8 FLAT
WASHER
3/8-16 X 3.25
HHC SCREW
MAIN HANDLE
(TUBE)
3/8-16
NYLOC NUT
T-HANDLE BAR
HEIGHT
ADJUSTMENT
STAR WHEEL
