manualshive.com logo in svg

MULTIQUIP Power Ultra-Silent DCA-45USI, Руководство по эксплуатации и запасным частям

Поделиться
Скачать
MULTIQUIP Power Ultra-Silent DCA-45USI Скачать руководство пользователя страница 9

DCA-45USI — OPERATION AND PARTS MANUAL (STD) — REV. #2  (04/22/05) — PAGE 9

Accidental Starting

ALWAYS

 place the engine ON/OFF switch

in the 

OFF

 position, when the trowel is not

in use.

Over Speed Conditions

NEVER

 tamper with the factory settings of the

engine governor or settings.  Personal injury
and damage to the engine or equipment can
result if operating in speed ranges above
maximum allowable.

Respiratory Hazard

ALWAYS

 wear approved respiratory protection.

ALWAYS

 wear approved eye and hearing

protection.

Sight and Hearing hazard

Equipment Damage Messages

Other important messages are provided throughout this manual
to help prevent damage to your trowel, other property, or the
surrounding environment.

This 

generator

, other property, or

the surrounding environment could
be damaged if you do not follow
instructions.

 

NOTE

DCA-45USI — SAFETY MESSAGE ALERT  SYMBOLS

Содержание Power Ultra-Silent DCA-45USI



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды