A.
B.
C.
A
B.
Remove the slider (9) and the inner wire from
there.
Remove the outer wire by unscrewing 2 pcs
nuts (7) after removing the wire cap (6).
Reassemble with the reversed procedure of
disassembly.
In case of removing the fuel cock (3), move to
high speed position of the lever (2) ready.
(fig.29)
C.
D.
A.
Remove the fuel tank (10) from the handle by
unscrewing 3 pcs bolts (11) after disconnect-
ing the fuel hose (19).
Unscrew 2 pcs tapping screws (22) which
fixing the meter finisher from the underside of
the fuel tank, and remove the hour & tachom-
eter and the meter finisher at the same time
because they are tightening at the same time.
In case of replacing the fuel filter (14) which
installed in the fuel tank, remove the fuel filter
holder (16) by unscrewing 3 pcs nuts (17)
which is fixing it.
Reassemble with the reversed procedure of
disassembly with attention to the following
terms.
Replace the damaged fuel hoses (19, 103,
104) with new one.
Be careful not too tightening the tapping
screws (22) which is fixing the hour &
tachometer and the meter finisher because
the threaded holes of the meter finisher made
by plastic is broken by over tightening torque.
(1) Disassembly
5-2 Disassembly and reassembly
the fuel cock
(1) Disassembly
(2) Reassembly
(2) Reassembly
fig.28
In case of removing the throttle wire (5),
move to idling position of the lever (2) ready.
(fig.28)
Remove the end cap (11) and unscrew a bolt
(10) and 2 pcs nuts (8).
A.
B.
8.5 Disassembly and reassembly the
combination lever
(1) Disassembly
5-1 Disassembly and reassembly
the throttle wire
fig.27
1
2
3
4
5
6
7
8
8
9
10
11
12
13
14
15
16
17
18
19
20
14
8.4 Disassembly and reassembly the
handle.
3
41
41
101
101
101
101
7
6
5
43
43
42
42
A
9
54
51
10
22
56
14
15
18
16
17
53
A
11
55
4
52
102
103
57
104
fig.26
20
19
20
