MULTIQUIP Mikasa series MVH-306D, Руководство по эксплуатации и запасным частям

Страница: 14 / 74

PAGE 14 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)
Figure 4. MVH-306D/DS Reversible Plate
Compactor Components
Figure 4 illustrates the location of the major components for the
MVH-306D/DS Reversible Plate Compactor. The function of each
component is described below:
1 . Hand Grip – When operating the compactor use this hand
grip to manuever the compactor.
2 . Forward & Reverse Lever –
Push
the lever forward, the
compactor will move in a forward direction, pull the lever
backwards, the compactor will move in backwards direction.
Placing the lever in the middle (midway) will cause the
compactor not to move (neutral).
3 . Handle Bar – When operating the compactor, this handle
is to be in the downward position. When the compactor is
to be
stored
, move the handle bar to the upright position.
4. Guard Hook - Used to lift the machine with crane or other
lifting device.
5. Stopper - Locks the handle in place in the upward postion
for stowing.
6 . Engine – This plate compactor uses a YANMAR L-70EE
D/DS diesel engine. Refer to the owner’s manual for engine
information and related topics.
7. Battery (Option) - This unit uses a 12-volt battery. See
maintenance of this manual for proper care of battery.
8 . Belt Cover – Remove this cover to gain access to the V-
belts. NEVER run the compactor without the V-belt cover. If
the V-belt cover is not installed, the possibility exist that
your hand may get caught between the V-belt and clutch,
thus causing serious injury and bodily harm.
9 . Base Plate – Designed to compact sand, clay, and asphalt.
10 . Oil Reservoir – Fill with Shell Tellus Oil 46 or equivalent
grade hydraulic oil.
11 . Vibration Case – Encloses the eccentric, gears and
counter weights.
12 . Hydraulic Cylinder – Activated by moving the travel lever.
The cylinder controls the direction of movement by the plate
compactor.
13 . Shock Absorber – Protects plate compactor from damage
by absorbing vibration durring operation.
14. Throttle Lever – Controls speed of the plate compactor.
Place straight vertically to start, push fully counter-clockwise
for full throttle and fully clockwise to stop plate compactor.
14. Ignition Switch (Option) – Provided for electric start
models onlt
COMPONENTS