MULTIQUIP MC94PH8 Скачать руководство пользователя страница 8

Страница: 8 / 80

MC94P/S CONCRETE MIXERS — OPERATION AND PARTS MANUAL — REV. #9 (09/15/11) — PAGE 9

MC94P/S CONCRETE MIXER — RULES FOR SAFE OPERATION

■

ALWAYS

refuel in a well-ventilated area, away from sparks

and open flames.

■

ALWAYS

use extreme caution when working with

flammable

liquids. When refueling,

stop the

engine and allow it to cool.

DO NOT

smoke around or near the machine. Fire or explosion

could result from fuel vapors, or if fuel is spilled on a hot
engine.

■

NEVER

operate the mixer in an explosive

atmosphere or near combustible
materials. An explosion or fire could result
causing severe

bodily harm or even

death

■

Topping-off to filler port is dangerous, as it tends to spill fuel.

■

Refer to the

Engine Owner's Manual

for engine technical

questions or information.

■

NEVER

use accessories or attachments, which are not

recommended by Multiquip for this equipment. Damage to
the equipment and/or injury to user may result.

■

Manufacturer does not assume responsibility for any accident
due to equipment modifications.

■

NEVER

touch the hot exhaust manifold,

muffler or cylinder. Allow these parts to
cool before servicing engine or mixer.

■

The engine of this mixer requires an adequate free flow of
cooling air.

NEVER!

operate the mixer in any enclosed or

narrow area where free flow of the air is restricted. If the air

flow is restricted it will cause
serious damage to the mixer
or engine and may cause
injury to people and property.
Remember the mixer's engine
(gasoline models only) gives
off

DEADLY

gases.

■

High Temperatures

– Allow the engine to cool before adding

fuel or performing service and maintenance functions. Contact
with

hot components can cause serious burns.

DANGER:

Failure to follow instructions in this manual may
lead to serious injury or even death! This

equipment is to be operated by trained and
qualified personnel only! This equipment is for
industrial use only.

The following safety guidelines should always be used when
operating the

Multiquip

MC94P/S Concrete Mixers:

GENERAL SAFETY

■

DO NOT

operate or service this equipment before

reading this entire manual.

■

This equipment should not be operated by
persons under 18 years of age.

■

NEVER

operate this equipment without proper

protective clothing, shatterproof glasses, steel-
toed boots and other protective devices required
by the job.

■

NEVER

operate this equipment when not feeling

well due to fatigue, illness or taking medicine.

■

NEVER

operate this equipment under the

influence or drugs or alcohol.

■

Whenever necessary, replace nameplate, operation and
safety decals when they become difficult read.

■

ALWAYS

check the machine for loosened threads or bolts

before starting.

■

ALWAYS

wear proper respiratory (mask) hearing and eye

protection equipment when operating the mixer.

■

NEVER!

place hands inside the drum while the drum is

rotating.

Discount-Equipment.com

Содержание MC94PH8

















































































Результаты поиска

Содержание MC94PH8

Отзывы:

Похожие инструкции для MC94PH8

Бренды по названию

Популярные бренды

MULTIQUIP MC94PH8, Руководство по эксплуатации и запасным частям

Результаты поиска

Содержание MC94PH8

Отзывы:

Похожие инструкции для MC94PH8

Бренды по названию

Популярные бренды