MULTIQUIP CDM2CSA, Руководство по эксплуатации и запасным частям

Страница: 6 / 40

PAGE 6 —DM15A9C/CDM2CSA — OPERATION AND PARTS MANUAL — REV. #2 (09/04/19)
Other important messages are provided throughout this
manual to help prevent damage to your drill, other property,
or the surrounding environment.
CAUTION - Equipment Damage Hazards
ALWAYS wear approved eye and
hearing protection.
CAUTION - Eye and Hearing Hazards
ALWAYS place the core-drill's ON/OFF
switch in the OFF position when the drill
is not in use.
CAUTION - Accidental Starting Hazards
DM15A9C/CDM2CSA— SAFETY MESSAGE ALERT SYMBOLS
Safety precautions should be followed at all times when operating
this equipment. Failure to read and understand the Safety
Messages and Operating Instructions could result in injury to
yourself and others.
FOR YOUR SAFETY AND THE SAFETY OF OTHERS!
NOTE
SAFETY MESSAGE ALERT SYMBOLS
The three (3) Safety Messages shown below will inform you
about potential hazards that could injure you or others. The
Safety Messages specifically address the level of exposure
to the operator, and are preceded by one of three words:
DANGER , WARNING , or CAUTION .
You WILL be KILLED or SERIOUSLY injured if you DO
NOT follow directions.
DANGER DANGER
DANGER DANGER DANGER
You CAN be KILLED or SERIOUSLY injured if you DO
NOT follow directions.
WARNING WARNING WARNING WARNING WARNING
You CAN be
INJURED
if you DO NOT follow directions.
CAUTION
CAUTION CAUTION
CAUTION CAUTION CAUTION
ALWAYS wear approved respiratory
protection when required.
WARNING - Respiratory Hazards
NEVER tamper with the factory settings
of the core drill. Personal injury and
damage to the core drill can result if
operating in speed ranges above
maximum allowable.
Rotating drill bit can cut and
crush. Keep hands and feet
clear.
CAUTION - Over Speed Conditions
CAUTION - Rotating Drill Bit
This Operation and Parts Manual
has been developed to provide
complete instructions for the safe
and efficient operation of the
MQ
Models DM15A9C/CDM2SA
Core Drill Motor and Drill Rig
Before using this core drill stand and electric motor, ensure
that the operating individual has read and understands all
instructions in this manual.
HAZARD SYMBOLS
Potential hazards associated with the operation of the
DM15A9C (electric motor) and MQ CDM2CSA (drill
rig) will be referenced with Hazard Symbols which appear
throughout this manual, and will be referenced in
conjunction with Safety Message Alert Symbols.