MULTIQUIP CA4HC Whiteman Series Скачать руководство пользователя страница 12

PAGE 12 — CA4HC WALK-BEHIND TROWEL— OPERATION MANUAL — REV. #0 (09/29/06)

CA4HC TROWEL — RULES FOR SAFE OPERATION

The following safety guidelines should always be used when
operating the CA4HC.

SAFETY

DO NOT 

operate or service this equipment

before reading this entire manual.  The
manual must be kept available and accessible
to the operator.

This equipment should not be operated by persons under the
minimum statutory age limit.

ALWAYS

 use extreme caution when working with 

flammable

liquids. When refueling, 

STOP

 the engine and allow it to cool.

NEVER

 touch the hot exhaust manifold, muffler

or cylinder. Allow these parts to cool before
servicing the trowel.

The engine of this trowel requires an adequate free flow of
cooling air. 

 NEVER 

operate the trowel in any enclosed or

narrow area where free flow
of the air is restricted. If the
air flow is restricted it will
cause serious damage to
the  engine and may cause
injury to people. Remember
the engine gives off

DEADLY 

carbon monoxide

gas.

High Temperatures

 – Allow the engine to cool before adding

fuel or performing service and maintenance functions. Contact
with 

hot!

 components can cause serious burns.

ALWAYS

 refuel in a well-ventilated area, away from sparks

and open flames.

RULES FOR SAFE OPERATION

ALWAYS

  check the trowel for loosened hardware such as

nuts and bolts before starting.

Replace nameplate, operation and safety decals when they
become difficult to read.

NEVER

 use accessories or attachments which are not

recommended by Multiquip for this equipment. Damage to
the equipment and/or injury to user may result.

Manufacturer does not assume responsibility for any accident
due to equipment modifications. Unauthorized equipment
modification will void all warranties. Any modification which
could lead to a change in the original characteristics of the
machine should be made only by the manufacturer who shall
confirm that the machine is in conformity with appropriate
safety regulations.

WARNING

WARNING

WARNING

WARNING

WARNING

Failure to follow instructions in this manual may lead to serious
injury or even death! This equipment is to be operated by
trained and qualified personnel only!  This equipment is for
industrial use only.

NEVER

 smoke 

around or near the machine.

Fire or explosion could result from 

fuel

vapors

, or if fuel is spilled on a

 hot! 

engine.

Topping-off to filler port is dangerous, as it tends to spill fuel.

NEVER

 use fuel as a cleaning agent.

NEVER

 operate this equipment when not feeling well due to

fatigue,  illness or  taking medicine.

NEVER

 operate the trowel under the influence or drugs or

alcohol.

NEVER

 operate the trowel without proper protective clothing,

shatterproof glasses, steel-toed boots and other protective
devices required for the job.

NEVER

 use this machine for any purpose other than those

described in this manual.

NEVER

 operate the trowel in an

explosive atmosphere where fumes
are present, or near combustible
materials. An explosion or fire could
result in severe 

bodily harm or even

death

.

Содержание CA4HC Whiteman Series









































































Отзывы: