multiplex
technology, inc.
3001 Enterprise St., Brea, CA 92821-6213. U.S.A.
*
* Fax 714-996-4900
714-996-4100 800-999-5225
Bandwidth from dish to receiver
Voltage range from receiver to dish
LNB current range
Operating temperature range
Dual pane window thickness range
950 MHz to 1.45 GHz
+10.5 VDC to + 21.0 VDC
50 mA to 200 mA*
-40 F to + 122 F
0.50 to 0.75 inch
º
º
(For single pane glass, use Model 1111)
Warranty
Multiplex Technology, Inc., warrants this product to be free from defects in materials
and workmanship for a period of one year from the date of purchase or MTI will
repair or, at its option, replace the defective product. To obtain warranty service, call
MTI for a Return Material Authorization (RMA) number and return the product pre-
paid accompanied by a copy of the purchase receipt,
to Multiplex Technology, Inc.,
3001 Enterprise St., Brea, CA 92821,
Attn: Customer Service. Please put the RMA
number on the outside of the carton.
Any implied warranty arising from the sale of the product including implied
warranties of merchantability and fitness for purpose are limited to the warranty
stated above. MTI shall not be responsible for any loss, damages or expenses,
whether direct, consequential, or incidental arising from the use or inability to use
this product. Some states do not allow limitations on how long an implied warranty
lasts or the exclusion or limitation or incidental or consequential damages, so the
above limitations may not apply to you. This warranty gives you specific legal rights,
and you may have other rights which vary from state to state.
Note
: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Parts 15 and
18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
: Any changes or modifications not expressly approved by the manufacturer of this device could void the user's
authority to operate the equipment.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Caution
!
WARNING:
To prevent electrical shock, do not attempt to
service unit. No user-serviceable parts inside.
Post-it™ is a trademark of 3M; GlassLink™ is a trademark of Multiplex Technology, Inc.
* High current LNBs may require use of
model 1100 GlassLink™ Power Booster
This product is covered by the following patents: US patent number 5612652, ROC patent number 086813
600-503 B
®
dish-to-receiver connection
Model 1112
For Dual Pane Glass
(for single pane use model 1111)
multiplex
technology, inc.
3001 Enterprise St., Brea, CA 92821-6213. U.S.A.
*
* Fax 714-996-4900
714-996-4100 800-999-5225
U.S. and international patents pending.
Glass
TM
Glass
TM
INSIDE
®
