Multiplex BIC Скачать руководство пользователя страница 3

Страница: 3 / 4

18. Hang electrical panel back in position and

secure with screw.

19. Replace channel on base cabinet. Place utility

box on cabinet next to channel.

20. Place tab on right side of utility box behind

frame and install screw.

21. Install screws inside back of utility box on left

and right sides.

22. Secure drain lines to fittings with oetiker clamps

provided in install kit.

23. Route power cord through side of box and

bushing in tab at rear of box. Reconnect wires

and reinstall ground screw.

24. Secure power cord to box with strain relief.

Multiplex
2100 Future Drive
Sellersburg, IN 47172

Phone: 844-724-2273
Fax: 920-683-7592

08/28/2018
9295083
Page 3 of 4

BIC Manual Fill Drain Installation

Applicable to MA-8-2, MA-8-2BF, MA-8-2AF

Содержание BIC

Страница 1: ...cord hanger Save cord hanger for reinstallation 5 Remove screws from gas water inlet fitting bracket Disconnect gas water lines from regulators on side of unit Take electrical panel loose from unit a...

Страница 2: ...nit to blend chambers and center drain Drain lines should be installed underneath the wire harness to avoid high spots in drain Align notches on drain lines with splines on blender drains and install...

Страница 3: ...ox on left and right sides 22 Secure drain lines to fittings with oetiker clamps provided in install kit 23 Route power cord through side of box and bushing in tab at rear of box Reconnect wires and r...

Страница 4: ...27 Align cord hanger with side and top of serial tag Mark holes and drill pilot Secure to cabinet with self drilling tapping screws provided in install kit 28 Reinstall side panels and new back panel...