Multimetrix VT 35 Скачать руководство пользователя страница 3

 

 

Guarantee 

The unit is guaranteed in accordance with the terms and conditions against material and 
manufacturing defects. 
During the warranty period (1 year), the device may only be repaired by the manufacturer, who 
reserves, service the unit of to replace all or part of. 
The cost of returning the product to the manufacturer shall be borne by the buyer. 

The warranty is closed out in the following cases: 
1. improper use of the equipment or use with incompatible 
Accessories; 
2. in changes to the device without permission from the Her-steller; 
3. whenever acting on the device by a non-authorized person by the manufacturer; 
4. When adapting the device to applications for which the device is not provided 
is seen and that are not listed in the user manual; 
5. in damage from impact, fall or prolonged immersion. 

Unpacking – Packing 

Before  shipping  the  equipment  has  been  tested  mechanically  and electronically  in  detail  and  all 
precautions have been taken in order to receive the instrument in a-perfect condition. Please check 
the  device  during  unpacking  for  full-ness  and  transport  damage.  Notifications 
s When transport damage immediately to the respective delivery service. 

If you want to send the device, to use preferably the original packaging and place it in an email in 
which you describe the reasons for the return as clearly as possible. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Содержание VT 35






Отзывы: