Visit
for new product releases!
INST
ALLA
TION
Cop
yrigh
t © 2021 Multilink I
nc
. A
ll righ
ts r
eser
ved • Sp
ecific
ations subjec
t t
o change without notic
e • Re
v. 6/14/2021 •
Contact Us |
North America
Tel: +1 440 366 6966
Fax: +1 440 366 6802
Email:
Tel: +1 440 366 6966
Fax: +1 440 366 6802
Email:
Tel: +1 440 366 6966
Fax: +1 440 366 6802
Email:
Europe, Middle East & Africa
Latin & South America
Page 4
D
o
cum
en
t N
o.
020
-30
6-20
In
stal
l
2. Preparations
2.1 Installation Outline
The general procedure of the Fiber Tap Plus installation includes:
•
Feeding & securing cables through the Fiber Tap Plus input port(s)
•
Securing CSM (Central Strength Member) to FTP (Fiber Tap Plus) base
•
Configuring grommet(s) for cable entry
•
Installing connectors into internal adapters
•
Attaching FTP base to cover using supplied
hardware
•
Safety Glasses
•
Cut-Resistant Gloves
•
Scissors
•
Side Cutters/Diagonal Cutters
•
Fiber Jacketing Stripper
•
Buffer Tube Stripper
•
Flat Head Screw Driver
•
Phillips Head Screw Driver
•
Pliers/Needle Nose Pliers
•
Torque Wrench
•
Tape Measure
•
Colored Marker
•
Bend Radius Gauge (See Figure)
A
2.2 Fiber Tap Plus Checklist
Each kit includes the following items:
•
1x Fiber Tap Plus Assembly (A)
•
1x Hardware Kit (B)
2.3 Recommended Tools and Equipment
The Following list includes tools and equipment that you may need for a successful
installation (these tools
ARE NOT INCLUDED
with the product or accessories):
B
2.400
60mm
BEND RADIUS GAUGE
DO NOT EXCEED THE BEND
RADIUS MENTIONED TO
AVOID DAMAGING FIBER
SCALE 1:1
ultilink
NO SHARP EDGES OR
BURRS ALLOWED
SCALE:
SIZE
CAD FILE:
DWG. NO.
A
SHEET
OF
REV.
DRAWN BY:
FRACTIONS DECIMALS ANGLES
1/32
MATERIAL:
FINISH:
DO NOT SCALE DRAWING
Description
Bend Radius Gauge
1:1
1
1
DESCRIPTION OF CHANGE
REV
DATE
ECN#
.XX= .03
.XXX= .010
1
ALL FLATS TO BE .005
Bend Radius Gauge
BY
MFG
ENG
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
TOLERANCES ARE:
DATE:
THIS DOCUMENT AND THE INFORMATION
CONTAINED THEREIN ARE CONFIDENTIAL
& PROPRIETARY TO MULTILINK AND MAY NOT
BE COPIED OR DISCLOSED TO OTHERS
WITHOUT A WRITTEN CONSENT FROM
MULTILINK. THE INFORMATION IS TO BE
PROMPTLY RETURNED TO MULTILINK UPON
REQUEST.
DATE:
DATE:
DATE:
CHECKED:
MFG ENG:
QUALITY
ENG:
m
00/00/15
Bend Radius Gauge
JM
01
XX GA. / 0.000 XXXXX
N/A
JM
00/00/15
01 N/A INITIAL RELEASE
