Visit
for new product releases!
INST
ALL
ATION
Cop
yrigh
t © 2019 Multilink I
nc
. A
ll righ
ts r
eser
ved • Sp
ecific
ations subjec
t t
o change without notic
e • Re
v. 5/10/2019 •
Page 23
Do
cumen
t N
o. 010-028-
A0
23
Config Time
Time
may be adjusted based on a 24 clock format using the Right or Left
12-30
buttons.The selected item will be underlined. Use the Down button to select the
new time. Press the Enter button to save the new time.
Press the Back button to
return.
Dates that are not saved will return to previously save date.
Config On Batt Timer
On Batt Timer
is used to delay the activation of the On Batt Relay contact.
Minutes 0005
Use the Right or Left buttons to select the minutes position.
Press the Enter button to save the new On Batt Timer delay. Press the back
button to return to the previous menu.
Config IP Address
The Default
IP address
is 192.168.1.210. The user may apply a new static IP
1 9 2 . 1 6 8 . 0 0 1 . 2 1 0
address.
Use the Right or Left buttons to select the position to change.
Use the Down button to select a new number for that position. Press Enter to save
the new IP address. If changed, the
Subnet Mask
and
Gateway
must also
change.
Config Sub Net Addr
When necessary, the user may change the
Subnet Mask
.
2 5 5 . 2 5 5 . 2 5 5 . 0 0 0
address.
Use the Right or Left buttons to select the position to change.
Use the Down button to select a new number for that position. Press Enter to save
the new Subnet Mask.
Config Gateway Addr
When necessary, the user may change the
Gateway
address.
1 9 2 . 1 6 8 . 0 0 1 . 0 0 1
Use the Right or Left buttons to select the position to change.
Use the Down button to select a new number for that position. Press Enter to save
the new Gateway address.
Clear All Events
The user may clear all
events
by pressing the Down button and selecting
0005
the Enter button
.
The Right and Down buttons will disappear after pressing the
Down button.
The currently shown number of events will then be cleared. Press
the Back button to return to the previous menu.
Restart
This item restarts the communication board of the UPS.
Press the Down button to enter the item and press the Enter button to restart
the communication board. Network connectivity will be lost momentarily.
Config to Default IP
The user may use the Config to Default IP to reset the IP address, Subnet
Mask, and default gateway address to factory defaults.
Press the Enter button to reset the IP. Device may lose network connectivity.