Multilaser RE034, Руководство пользователя

Страница: 170 / 192

170
Adaptadores Wireless
: to add the entered wireless client MAC address to the list.
: to delete an existing MAC address in the list.
: to delete all clients’ wireless MAC addresses in the list.
Add the MAC address of the client’s wireless network adapter to the list and select “All
Allow” in the access policy drop-down list, computers whose wireless MAC addresses
are not included in the list will be rejected by default. Select “All reject”, and only the host
computers whose wireless MAC addresses are included in the list can not access the AP
wireless network.
4.2.4 Associate List
When there’s client connected to this AP and has successfully obtained the IP address
,then the client’s MAC address, AID and Status can be seen on the list.
4.2.5 AP Mode under Windows 7
1. Under Windows 7, wireless adapters are allowed to work in both STA and AP
modes. Here, the wireless adapter acts not only as a client, but also an AP to send
wireless signal, which equals to an amplifier. Right click the UI icon on the lower