Multilaser AU304, Руководство пользователя

Страница: 4 / 5

7 6
Instal the pillow
The circuit connection of the pillow monitor is very simple. As shown in diagram above. Connect
the red wire to positive (+12v) and black wire to negative (ground). Conect the yellow RCA to video
source.
How to use the adapter tubes
Since the spacing of the mouting holes can vary on different vehicles we
supply two adapter tubes (12mm diameter). Use these tubes when the
headrest mouting holes in your seat are too larger for the posts of the
headrest monitor.
Move the steel tubes back and forth to pull them in and out so that the
interval between steel tubes coincides with that os the original pillow.
Sound system
185mm
Max. interval
100mm
Min. interval
Remote function
1. Power switch
2. Video select
3. Menu
4. Increase
5. Decrease
6. Mode select
Remark: Mute is not avaliable
for this model. Contends and
specifications are subject to
change without prior notice.
Structure
1. Power: Press this button to power ON/OFF
2. AV: AV1/ AV2 Switching functions
3. MENU: Press TFT menu ong
4. - , Analog decrease
5. +, Analog increase
6. MODE:Press this button to achieve 16:9/4:3
swithcing functions
7. Sys:sys
Package content
1. AV input line
2. Assembly stick
3. Remote control
4. User’s manual
Red wire to +12 VCC battery
Battery
Black wire chassis ground
Yellow - video 1 input
Yellow - video 2 input