Multikomplex SLT968, Инструкция по установке, использованию и обслуживанию

Страница: 14 / 24

14
The use of materials which
can burst into flames should
be avoided in close proximity
of the appliance. When frying,
please
pay particular
attention to fire risk due to oil
grease.
Being highly
inflammable, fried oil is
especially dangerous. Do not
use uncovered electric grills.
In order to avoid possible fire
risk,
all instructions for
grease filter cleaning and
grease
deposits removal
should be strictly followed.
USES
SLT968 EM and SLT 968 EM models can be
used only if connected with external motors
manufactured by the same producer.
SLT968 and SLT969 models are equipped with
internal motor.
PANEL OPENING
It is possible to open the panel, which cover the
grease filters, slightly pulling the panel on a side,
as shown on fig. 1.
In order to make the hood working properly, it is
recommended to install the appliance at a
distance of 2000 - 2100 mm from the floor.
Before starting the appliance installation, please
check that all components are not damaged, in
such a case contact your retailer and do not
carry out installation.
Furthermore, please read carefully all of the
following installation instructions.
- Use an exhausting pipe whose maximum
length does not exceed 5 meters.
- Limit the no. of elbows in the piping, since each
elbow reduces the air capacity of 1 linear meter.
(Ex.: if you use no. 2 x 90 ° elbows, the length of
piping must not exceed 3 meters).
- Avoid abrupt direction changes.
- Use a 150 mm constant diameter pipe for the
whole length, or same section.
- Use piping approved by standards in force.