multifun Creative Bud MF-AH03, Руководство пользователя, Страница: 4 / 8

How to operate the unit:
1. Place the unit on flat surface and remove the top cover.
(See figure A.)
2. Plug the power adapter into the unit’s DC power port.
(See figure B.)
3. Use the measuring cup to add water into the container. Do not exceed 500ml which is the
maximum volume the unit can hold.
(See figure C.)
Do not add water if the unit is in the midst of
running. Recommended water temperature is <40°C.
4. When the container is filled, drop some essential oil into water. (Suggesting 0.1ml~0.15ml
essential oil for every 100ml of water.)
(See figure C.)
5. Put back the top cover. The logo should align to where the buttons are. Important: before
turning on the unit, make sure the top cover has completely encased the upper part of the unit.
If there is leakage, the mist output performance will be greatly affected.
(See figure D.)
6. Plug the power adapter to any home power source. The unit by default setting is off when it is
plug in.
7.
‘MIST’ button is the ON switch , by pressing this button the unit will start running
continuously. By further toggling the ‘MIST’ button, you can access the TIMER function of the
unit. 2H, 4H, 8H are preset hours that you can set for the unit to run.
(See figure E.)
ON / 2H / 4H
/ 8H / OFF is the complete sequence by toggling the button. The mist and unit will turn off
once it has reached its configured time. If you wish to turn OFF the mist at any given time, a
long press on ‘MIST’ button will also switch the unit off. Only one mist output level is
available for this model , the ‘MIST’ button does not alter the output level.
8. Toggle the ‘LIGHT’ button will allows you to turn on and off the unit’s illuminating light. Hold
the ‘LIGHT’ button will then turn the task LED light/TIMER (ON / 2H / 4H / 8H / OFF display) off.
9. If not in-use for long period of time, make sure all the water is poured out and the unit dried
out in a cool ventilated place.
10. During water shortage, the unit will auto-shutoff, even by pressing the ‘MIST’ button the unit
will not run. You will hear
10 beeps accompanied by 10 LED flashes if the button is pressed
during this time. The button will not response until the warning is finished.
11. In TIMER mode, LED task light will turn off when it has reached the configured time.
figure A
flat surface
lift top cover
figure B