Instruction Manual, HD-3500 Series
APPENDIX C. Technical Specifications 11
REV F, April 1, 2015
APPENDIX C. Technical Specifications
General
Power: .............................................................................................. 9-24V / 25W
Max Range with default Single Mode optics ...................................... up to 40Km
Fiber Connector Type ....................................................................... ST or SC
Standards Supported ........................................................................ SMPTE 259M-C
SMPTE 292M
SMPTE 425M
SMPTE 297M
DVB/ASI
AES3 / AES3id
RS232/RS422
Transmitter (-FTX)
SDI/HDSDI Transport:
Input Type ......................................................................................... 1 BNC
Input Impedance ............................................................................... 75 Ohms
Loop Output Type .............................................................................. 1 BNC
Loop Output Impedance .................................................................... 75 Ohms
Input and Loop Output Return Loss .................................................. >15dB up to 1.5GHz
>10dB up to 3 GHz
Wavelength ....................................................................................... 1310nm Single mode
Optical Power .................................................................................... –2 dBm to 0 dBm
Laser Strength ................................................................................... Laser Class 1
Added Jitter: ...................................................................................... <0.03UI under 1MHz
Audio:
Analog Input level selections ............................................................. 28/16/10/4 dBu FS
Bandwidth .......................................................................................... +/- 0.5dB 20 to 20KHz
Analog Impedance input .................................................................... 20KOhm / 600Ohm
AES impedance input ....................................................................... 75 / 110 Ohm
Intercom level .................................................................................... 4 dBu FS
Intercom input impedance ................................................................. 10 KOhm
Intercom output impedance ............................................................... < 50 Ohm
Data:
Data rates for .................................................................................... DC to 3Mbps
Input RS232 range ............................................................................ +/- 25V max, 2V min
Input RS422/485 range ..................................................................... -7V to 12V, 0.2V diff min
Out RS232 levels ............................................................................... +/- 5V
Out RS422/485 levels ........................................................................ 0 / 2.3V
GPI off current (using open collector) ................................................ <1mA
GPI on voltage (using a voltage source) ............................................ 2.5 to 5 V
GPO on switching current .................................................................. 2 A max
GPO on switching voltage ................................................................. 48V max