Made in the USA
November 2019
© 2019 MultiDyne, Inc.
2
GenPlex 12G Repeater Configuration and Installation
FUCTIONAL DESCRIPTION
GenPlex Repeater
GenPlex Repeater models available to enhance signal strength for distances up to 40km ± 2Km. These repeaters are designed for
optimum performance in support of any network design and a multitude of camera models and manufacturers. Each GenPlex Repeater
is configured internally with Small Factor Pluggable (SFP) module and Wavelength Division Multiplexing (WDM) devices of specific
values to accommodate all single fiber and double fiber network solutions. A breakdown of the internal workings of the GenPlex
repeater is shown in the table below.
Regen Repeater
There are four Regen Repeaters models available to enhance signal strength to 40km ± 2Km. These devices are designed for optimum
performance in support of any network design and a multitude of camera models and manufacturers. Each Regen Repeater is
configured with SFP modules of specific values to accommodate all single fiber and double fiber network solutions. A breakdown of
the internal workings of each Regen repeater is shown in the table below.
Model
Number
External
Connections
Internal
Configuration
Use
RGX-10G-40-ST4-A
2 A
2 B
2 1310 SFP
1 WDM
Camera/HUT Side
35km Distance
RGX-10G-40-ST4-B
2 A
2 B
2 1310 SFP
1 WDM
CCU/HUT Side
15km Distance
Model Number
External Connections Internal Configuration
Use
GP-10G-40-ST3-A
1 AMP OUT,
1 OPTICAL IN,
1 COMMON
1 1310 SFP
1 1550 SFP
1 WDM
Camera/HUT Side
Double Fiber Solution
GP-10G-40-ST3-B
1 AMP OUT,
1 OPTICAL IN,
1 COMMON
2 1310 SFP
1 WDM
CCU/HUT Side
Double Fiber Solution
