Channel Source & Mode Selection
Selecting the audio channels you want to monitor is provided by eight pushbuttons
located directly below the audio meters allowing the user to intuitively select whichever
stereo pair they would like to route to the speakers.
Pushbuttons numbered 1 through 8 allow the user to select the embedded audio pairs.
The 4 pushbuttons located to the right side of the source selection switches are for the
mode selection.
Modes
L only
Routes the Left Channel of the selected source to both speakers
R only
Routes the Right Channel of the selected source to both speakers
SUM
Allows any of the channels to be summed together to monitor more than
one source at a time.
Lt/Rt
Provides an Lt/Rt downmix of your 5.1 surround mix. Select the pair
where your 5.1 mix starts then press the Lt/Rt button the unit then
selects the 2 pairs beside it and creates the downmix from these 6
channels.
