11 - Check connections and apply Power
Check all connections are correct and secure. Rotate the screen into an upright position,
(the orange tab will then be
located on the rear of the screen in the bottom right hand corner. (see image below)
CAUTION:
This product should be placed on a stable, flat,
non-conductive surface
before power is applied and
when in use.
Plug the power supply into your mains outlet and turn on. Once power is applied the display system will boot up in
Raspbian desktop ready for use. (see image below example).
You can now load your own applications and software as required
10.1
″
IPS HD Resolution Touchscreen
Display for Raspberry Pi
P10
