••
...
5-5. Backlight Display
Press the Backlight button to turn on the backlight.
It will remain on for 40 seconds.
5-6. Automatic Power Off
The meter will automatically shut off after 20 minutes to conserve battery life.
To disable Auto Power Off , hold down the HOLD button and turn on the meter on,
An "n" will appear in the display indicating that Auto Power Off mode is disabled.
The meter will return to normal operation when it is turned off.
5-7. Units
Press the Unit button momentarily and the meter will cycle through the 11 available
units of measure as indicated by the cursor on the bottom of the display.
USB
T
o collect readings to a PC using
included
software
.
6.
Error Codes
An error message will appear on the display if the meter fails an internal diagnostic
test. And it will freeze all the buttons.
•
Err.1: Pressure value is over the range.
•
Err.2: Pressure value is below the range.
•
Err.3: DIF function, the differential pressure value is over range.
•
Err4: DIF function, the differential pressure value is below range.
7. Battery Replacement
When the battery power falls low "BAT" will appear on the LCD.
Replace the 9V battery noting polarity.
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS
OF ELECTRICAL & ELECTRONIC EQUIPMENT
These symbols indicate that separate collection of Waste Electrical and Electronic
Equipment (WEEE) or waste batteries is required. Do not dispose of these items with
general household waste. Separate for the treatment, recovery and recycling of the
materials used. Waste batteries can be returned to any waste battery recycling point
which are provided by most battery retailers. Contact your local authority for details of
the battery and WEEE recycling
schemes available in your area
Made in China. LS12 2QQ
Man Rev 1.0
