Page <3>
V1.0
27/06/22
Newark.com/multicomp-pro
Farnell.com/multicomp-pro
sg.element14.com/b/multicomp-pro
Instructions
1. Remove widely range of solder smoke
Please adjust two gear keys if removing widely range off solder smoke, Gear 1 is suitable to be used under brighter
environment, the LED light is off when pressing Gear 1, Gear 2 is suitable to be used under dark environment, the LED light
is on when pressing Gear 2.
2. Remove close-up solder smoke
Please place this device on the desk as below picture if removing close-up solder smoke, and turn on Gear 1.
Comparing with vertical position, horizontal position can provide airflow and efficiency much more than vertical, and is not
much suitable for removing widely range of smoke.
Care and maintenance
1. Replace activated carbon filter
The filter observes soldier fumes and becomes white with clogging. Replace the filter when the suction power is drastically
reduced to clogging, or when the flux smell gets noticeably stronger. (note: Be careful that moisture water etc does not get on
the filter, or it can’t be used.)
