SPECIFICATION
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF
ELECTRICAL & ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical & Electronic
Equipment (WEEE). Any WEEE marked products must not be mixed with general household waste,
but kept separate for the treatment, recovery and recycling of the materials used. Contact your local
authority for details of recycling schemes in your area.
Made in China. LS12 2QQ
Man Rev 1.0
SOLDERING IRON TIP REPLACEMENT
•
Replacing the soldering iron tip should only be done when the iron is switched off
and at room temperature.
•
The tip can be changed or replaced by unscrewing the knurled nut barrel.
Caution
: Damage could occur if the iron is left on without the tip inserted.
•
After removing the tip, blow out any remaining oxide dust that may have formed in
the tip retaining area of the barrel.
Warning
: Care should be taken to avoid getting dust in your eyes.
•
Replace the tip and tighten the knurled nut barrel assembly with your fingers.
•
Pliers should only be used to tighten the nut if loosening occurs when the iron is
hot.
•
Do not over tighten the nut as the element could be damaged.
CLEANING
•
Cleaning should only be done when the power is switched off and the iron is at
room temperature.
•
Use a damp cloth and a small amount of liquid detergent if necessary.
•
Do not use any chemicals, abrasives or solvents that could damage the soldering
iron.
Part Number
MP740055
MP740057
MP740061
MP740063
Voltage
110/240VAC
110/240VAC
110/240VAC
110/240VAC
Power
80W
150W
80W
150W
Temperature
Range
5 Preset
Adjustments
5 Preset
Adjustments
250
o
C~480
o
C
250
o
C~480
o
C
Temperature
Accuracy
±10
o
C
±10
o
C
±10
o
C
±10
o
C
Temperature
Stability
±2
o
C
±2
o
C
±2
o
C
±2
o
C
Heating
Element
4 core
PTC heater
4 core
PTC heater
4 core
PTC heater
4 core
PTC heater
Heat
Indication
Blue LED
Blue LED
Blue LED
Blue LED
Temperature
Units
o
C
o
C
o
C/
o
F
o
C/
o
F
Indication
LED
LED
LCD
LCD
4
