User Manual
8
6.
Default
: Call out the factory settings.
7.
8.
Turn on/off
Decode
function.
9.
Snapshot
10.
Direction key:
Move the cursor of the focused parameter.
11.
M
rotary control (Multipurpose rotary control): when a
symbol appears in the
menu, it indicates you can turn the
M
rotary control to select the menu or set the value.
You can push it to close the menu on the left and right.
User Interface Introduction
1
3
15
10
23
20
6
7
8
9
12
13
16
17
18
22
24
5
14
21
2
4
19
11
4
12
Figure 3-5 Illustrative Drawing of Display Interfaces
1.
Waveform Display Area.
2.
Run/Stop
3.
The state of trigger, including:
Auto: Automatic mode and acquire waveform without triggering.
Trig: Trigger detected and acquire waveform.
Ready: Pre-triggered data captured and ready for a trigger.
Scan: Capture and display the waveform continuously.
Stop: Data acquisition stopped.
4.
The two blue dotted lines indicates the vertical position of cursor measurement.
