2
Please read these instructions carefully before use and retain for future reference.
Warning:
Do not connect to circuits carrying AC voltage in tone or polarity modes.
•
The maximum voltage allowed across the leads is 60V DC in tone and polarity
modes.
Warning:
Do not connect to circuits carrying AC or DC voltage in continuity test modes.
•
Check the test leads, probes and case insulation before using. If you find any
breakage or abnormality, or you consider the device is broken, stop using the
device immediately.
•
Do not touch the metal probe tips when making connections.
•
Do not use this meter in thunderstorm conditions.
•
Replace the batteries as soon as the low battery indicator appears on the display.
•
Remove dead batteries from the meter or if it is not going to be used for a long
time.
•
Never mix old and new batteries together, or different types of batteries.
•
Never dispose of batteries in a fire, or attempt to recharge ordinary batteries.
•
Do not use the meter with the battery or back cover open.
•
Before replacing the battery, turn off the meter and disconnect all the test probes.
•
To prolong battery life turn off the meter after use.
WHAT’S INCLUDED
•
Digital Tone Generator.
•
Probe.
•
User manual.
•
9V battery x 2off.
IMPORTANT SAFETY INFORMATION
OVERVIEW
Probe
1. Signal probe
2. Volume/sensitivity slider
3. Power LED
4. Test button
Tone Generator
1. Tone/Power/Continuity switch
2. Tone LED
3. Power LED
4. Continuity LED
5. Modular RJ11 connector
6. Test leads
