2
2. Plug extender board (f) into the HDMI & USB connectors on the
Raspberry Pi board.
3. Place Raspberry Pi & extender on carrier
plate assembly & secure with screws (b) as
shown.
4. Turn board assembly over so carrier
plate is on top & slide into top slot of
extrusion (h) as shown.
ASSEMBLY
1. Take carrier plate (g) & attach stand-offs
(c&d) with screws (b).
Attach both heat block (j&l) to carrier plate
(g) with screws (n) as shown.
Peel backing paper from adhesive pads
(k&m) & stick to each heat block (j&l).
Now remove remaining backing paper.
