multicomp pro HDS-N Series, Руководство пользователя, Страница: 57 / 82

8-Advanced Function of Oscilloscope
57
3. Press F1 key to select the measurement type Voltage . Two purple crossing dashed lines V1
and V2 are shown on the screen.
4.
Press
OPTION
and display as
—
Cursor 1
—
Cursor 2
When setting OPTION ▲ or OPTION ▼ , V2 will move up and down and the relating
voltage value to the zero position of Channel 1 will show at the bottom of the screen.
Setting OPTION ◄ or OPTION ►
,
V1 will move up and down and the relating voltage
value to the zero position of Channel 1 will show at the bottom of the screen, at the same
time the increment shows the absolute value of V1-V2 shown as Fig 46:
Figure 46: Use the Cursor for a Voltage Measurement
When log out submenu, every value will show on the right bottom of the screen as figure 47:
Figure 47