MULTICHANNEL SYSTEMS USB-ME128-System, Системное руководство

Страница: 22 / 38

USB-ME-System Manual
18
5.3.1 Front Panel
5.3.2 Power LED
The Power LED lights up when the USB-ME256 is connected via power supply unit to the power supply
system.
5.3.3 Analog Inputs A, C, B, and D
The 68-Pin MCS Standard connectors on the front panel of the device are analog inputs for the data
streams coming from the connected amplifiers. The connectors on the left side of the front panel labeled
with A and C communicate with the left digital Trigger Inputs 0 and 2. The 68-pin MCS standard
connectors on the right side labeled with B and D corresponds with the digital Trigger Input 1 and 3.
The MCS 68-pin high grade cables (C68x1M or C68x3M) with 68-pin MCS standard connectors on both
heads are used to connect MEA or ME amplifiers to the
USB-ME256 for analog data transfer. Please read
chapter "Pin Layout" (68-pin MCS Standard connector) in the Appendix.
5.3.4 Digital Trigger Inputs
The Digital Trigger Inputs 0, 1, 2 and 3 need Lemo coaxial cables with BNC connectors for the MEA
amplifier at one head and Lemo connectors at the other head for the
USB-ME256 device. The Digital
Trigger Inputs accept TTL pulses from any device, for example, signals from a stimulus generator STG
for triggering the system, and they control the recording.