MI
64
Innovation. Quality. Performance. Best in Industry. Worldwide.
ParkPos
The ParkPos function is used to set a specific Park location for the X- and Y-axes to assume after each job, which
is useful when currently using only a portion of the available table space. The X- and Y-axes can be set to move
just far enough out of the way for the material to be removed instead of parking all the way to the rear every time.
1. Press
Menu
to access the menu system.
2. Press
X-axis Jog Arrows
until Utility is highlighted in blue.
3. Press
Enter
to access the Utility sub-menu.
4. Press
X-axis Jog Arrows
until ParkPos is highlighted in blue.
5. Press
Enter
to access the ParkPos function.
6. Enter the desired park position for the head assembly in X using the number keypad (e.g., 100.000) or enter
0 to use the table size.
7. Press
Enter
to accept the value and return to the Utility sub-menu.
Routers * Lasers * Plasma * WaterJets * Knife Cutters
www.MultiCam.com v. 11 10
