Multibrackets M Universal IR Extender, Руководство по установке

Страница: 4 / 8

1
2
3
5
8
03
Each system needs a minimum of one IR Receiver (maximum of 3). You can use an extra
IR Receiver to operate your A/V equipment from another room.
Power Supply: DC12V/250mA, supplied from connected IR box
IR Input: 1×3.5mm jack connector, for IR Receiver (3 conductor plug).
IR Emitter Output: 6×3.5mm jack connector, for IR emitter;
Status : You can send a Power Status signal to the IR module by
connecting a Power adapter to this connection(12VDC/250mA)
which is switched by the device to be controlled.
Screw Terminal: A maximum of 3 parallel IR Receivers can be connected to
this input.
Status Indication: Green LED for system On/Off indication
IR Signal Indication: Blue indication LED
Power Indication: Red indication LED
Dimensions: 55×85×23mm
IR RECEIVER:
Frequency Range
Power Indication
IR Signal Status
Indication
IR Signal Indication
IR Reception Angle
IR Receiver Connection
Cable Length
Dimensions
20-60kHz
±10meters
Red LED for system
On/Off indication.
Green LED indicates
standby mode.
Blue indication LED
90º(+45º/-45º from center)
1×1.5mm jack plug
(3 conductor plug)
1×2meters
90x55x26mm
1
2
3
4
5
6
7
8
9