Multiaqua MHWX-09-C-1, Инструкция по установке и эксплуатации

Страница: 16 / 28

359
INSTALLATION & OPERATING
MANUAL
MHWX Hi-Wall Fan Coils
9,000 – 36,000 BTUH
MHWX CONTROLS OPERATION GUIDE
7. CANCEL
- To cancel any setting on the delay timer.
8.
LOUVER
- Two different functions are available:
1. To set the louver stop position. There are 4 angles available. The sequence is as
follows.
2. To set the louver swing (continuous motion). The sequence is as follows.
9. SLEEP
- This function when selected will allow the user to determine a “sleep” period. In
cooling the selected temperature will rise to 1
°
above set point in 1/2 hour,
rising to 2 ° in 1 hour, rising again to 4 ° after 2 hours of the SLEEP CYCLE.
SLEEP FUNCTION DISPLAY
10. DRY
- This function operates to control humidity within a conditioned space. It
measures the difference between set point and the actual room temperature.
An algorithm determines how far above set point the actual room temperature is
to set point temperature and selects periods of condenser operation and low fan
operation. The greater the difference between room temperature and set point
temperature prompts greater run time with less temperature. With less
temperature differences, periods of fan and condenser operation are called for in
varying increments as determined by the difference. In this mode (low speed) fan
operation will start 30 seconds after condenser has started and stops 30 seconds
after condenser has stopped.