INSTALLATION & OPERATING
MANUAL
MHWW Hi-Wall Fan Coils
36,000 BTUH
MHWW CONTROLS OPERATION GUIDE
11.
AUTO
- This function will automatically control the system switching between heating and
cooling operation. If the preset auto mode is cooling, a switch to heating
operation will begin only if the actual room temperature is 7
°
below selected
control set point. If the present auto mode is heating, a switch to cooling operation
will begin only when the room temperature is 3
°
above selected control set point.
12.
TRANSMISSION INDICATOR
- Blinks twice to indicate that transmission has taken place between remote and
receiver.
- Beeps indicate fan coil acknowledging receipt of transmission.
TRANSMISSION INDICATOR
13.
HOW TO INSERT BATTERIES
1. Remove the battery cover from the back of the remote.
2. Insert the (2) AAA batteries. Ensure that the polarity of the batteries are as shown
inside of the battery compartment.
3. Re-attach the battery compartment cover.
