△
！
CAUTION
POSSIBLE DAMAGE
It may cause the internal damage, if apply the voltage mistakenly at the rotary switch
position of
Ω
.
･
)))
➔
+ .
PULL OUT & PUT BACK OF TEST LEADS
This multimeter has the cord reel internally to roll up the test leads by one touch.
Pull Out
* Remove the test lead rods (red & black) from the body case.
* Pull out the test lead wires at the same time and apply them to measuring objects.
Put Back
* Slide up the lever switch at the left side of body case and then, the test lead wires will be
automatically rolled up into the body case.
* Put the test lead rods back to the body case.
REPLACEMENT OF BATTERY
△
！
WARNING
POSSIBLE ELECTRIC SHOCK & HAZARD
Do not operate with the back case removing.
Do not replace the battery at the time of measuring voltage.
△
！
CAUTION
In case of not using the instrument for a long time, keep stock with battery removing.
Power is supplied by two button type batteries (NEDA, 1166A, IEC LR 44). “ B “ mark
appears on the LCD display when replacement is needed.
△
！
WARNING
Before attempting to replace the battery, first disconnect the test leads from any
energized circuit.
①
Disconnect the test leads from any energized circuit.
②
Set the function switch to OFF. slide
③
Remove the battery cover screw.
④
Slide of battery cover and change two batteries.
⑤
Set the battery cover and screw.
battery cove
WARRANTY
This instrument is sent out from our factory after the sufficient internal inspections
but if you find any defect due to the fault in our workmanship or the original parts,
please contact the dealer where you bought the instrument.
The warranty period is 12 months from the date of purchase and the instrument shall be
repaired at free of charge, provided that we judge the cause of defect is obviously resulted
from our responsibility.
GURANTEE REGULATIONS
1.
This instrument is warranted for the operation under normal use for 12 months from
the date of purchase.
2.
This warranty does not cover the following defects:
a.
Defect caused from the improper use and operation.
b.
Defect caused from the use, operation and storage beyond the original specifications,
designs and conditions.
c.
Defect caused from the renovations or repairs done by someone else than us or our
representatives.
d.
Defect not caused from our responsibilities.