Multi M-1141, Инструкция по эксплуатации

Страница: 13 / 15

13 / 15
(5) Using the filter function; Automatically starts when the power is turned on and
display FL on the LCD to activate filter-mode. Press it again to turn-off. (Filter
specification; Band pass filter fo=55Hz)
(6) Using the data hold function; Press "DH / MAX" button
③
once and display DH on
the LCD. LCD holds a displayed measuring value of pressing. *While the auto-range
mode, it is canceled each time it is pressed. *While the manual-range mode, press twice
to turn-off.
(7) Using the MAX/ maximum hold function (Manual range only);
Press
“ Range ” button
⑦
and set to the manual-range mode.
Press “ DH / MAX ” button
③
twice to activate.
While "MAX" is displayed on the LCD, it holds a maximum reading value.
Press "DH / MAX" button again to release. *While MAX hold mode, the auto
power-off function delays (from 10-minutes) to 30-minutes after a last switch operation.
(8) After measurements, be sure to turn-off the power with pressing "Power" button
②
.
CAUSION
*If an excessive current is applied to CT, it may generate heat and damage to the
instrument.
*This instrument is a precision instrument. For handling, do not shock or shake. Take
care not to apply motion or excessive force.
*M-1141XR (True RMS model) takes about 10 seconds to be set to 0, with 0A primary.