Multi-Tech MTSMC-G2, Руководство по оборудованию

Страница: 17 / 33

Wireless Approvals and Labeling Requirements
Wireless Approvals (GSM, CDMA)
The Multi-Tech SocketModem is Industry and/or Carrier Approved as an End Product modem. In most cases, when
integrated and used with an antenna system that was part of the Multi-Tech modem certification, no additional
approvals or certification is required (however, CDMA has a few exceptions) for the device you develop as long as
the following are met:
•
PTCRB Requirements:
The antenna system cannot be altered.
•
Model Identification:
IMPORTANT
When the wireless carrier asks you to provide the modem's model identification,
give the Multi-Tech wireless model identification, not the identification of the host device model.
See the label example below.
The Multi-Tech model identification allows the carrier to verify the modem as one of its approved models.
This information is located on the modem's label.
The Following Is an Example of an End Product GPRS Label:
17
Host Device Model
Identification
Multi-Tech
SocketModem Model
Identification
IMEI
(International Mobile
Equipment Identity)
Comment [DAR6]:
Label_GPRS_F
4.png