MULTI MEASURING INSTRUMENTS MCL-350 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 8

MULTI MEASURING INSTRUMENTS MCL-350 Скачать руководство пользователя страница 1

AC CURRENT

ANALOG CLAMP-ON TESTER

MODEL MCL-350

INSTRUCTION MANUAL

                            Thank you very much for selecting our digital AC clamp-on
                            tester.
                            This model is complex instrument and employ a very reliable
                            mechanical/electronic design.

Before you use your new instrument, read this Instruction

                            Manual completely and familiarize yourself thoroughly with
                            all functions. With proper use and care, your tester will give
                            you years of satisfactory service.



                                    MULTI MEASURING INSTRUMENTS CO.,LTD.
                                    Akihabara Murai Bldg. 7F, 1-26 Kanda Sakuma-cho,
                                    Chiyoda-ku, Tokyo, Japan, 101-0025
                                    TEL : +81-3-3251-7016    FAX : +81-3-3253-4278
                                    Home Page :

http://www.mutimic.com/

E-mail :

[email protected]

1
2
3
...
»

Содержание MCL-350









Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды