OPERATIONAL NOTE: Operating with less than 4 Telephone Lines will diminish the inbound routing
capabilities: (4 Lines = 12 Ports, 3 Lines = 9 Ports, 2 Lines = 6 Ports, 1 Line = 3 Ports). Unless all four
telephones are operational, the vacant PRIMARY LINE PORT and its subordinate ports will be by-passed and not
be available for call routing functions. Example: If a telephone line is not attached to the Line 4 Position, Ports
1 0, 1], 12 will NOT be included in the routing sequence.
HUNTING - The Line Hunter hunts for an available line in a sequential order. That is, a device attached to
port 1, 2, or 3 will be connected to line 1 if available. If line 1 is not available, it will be connected to line 2, 3,
or 4 if they are available. If no lines are available, the device will not be connected to any outside line. A busy
tone can be provided to any device that requests an outside line when none are available (programmed using
DIP SWITCH).
HUNT ORDER - The hunt order for devices runs sequentially - Ports 1, 2, 3 first try to access LINE 1, then
LINE 2, LINE 3 and LINE 4. Ports 4, 5, and 6 start with LINE 2, LINE 3, LINE 4 and LINE 1. Ports 7, 8, and 9
hunt LINE 3, LINE 4, LINE 1 and LINE 2, etc.
LHM-401
If a line is not
connected, there
will be no inbound
call routing to its
group.
PANEL FRONT - DEVICE SIDE
LINE 4
225 Industry Parkway - Nicholosville, KY 40356 - Ph. 800-535-4651
4