13
12
Bring M5 and your vac together on a flat surface. Insert tee on M5
into hose adapter on vac. If they don't line up see Troubleshooting
Tip 2.
Insert bolt through hitch and
holes in support pipe. Tighten
bolt with included hex wrench.
10. Check fit
9. Install Bolt
Caster not on floor
Install 3½" bolt
Good to go
Give it another go
the moment of truth
Once everything aligns, ensure
tee is fully inserted into hose
adapter and tighten thumb
screw. AGAIN, HERCULES,
DON’T OVERTIGHTEN.
Install second hose adapter on M5
inlet, as shown.
11. Connect them
12. Install hose adapter
Optional: Secure hose adapter to M5 inlet with
included self-drilling screw for a more permanent
connection. Hand tighten with a Phillips
screwdriver to ensure you don’t strip the plastic.
Optional
