For your safety
EU declaration of conformity
1
30322538-02-EN
V9.20191001
9
When retrofitting a machine with electrical and electronic farm equipment and/or components
connected to the vehicle's electrical system, it is your own responsibility to check whether the
installation causes interference with the vehicle's electronic system or other components. This
applies, in particular, to the electronic control of:
▪
electronic hitch control (EHR),
▪
Front lifting gear,
▪
PTO shafts,
▪
Motor,
▪
Gear.
The following requirements must be met in order to retrofit mobile communication systems (e.g. radio,
phone):
▪
Only approved devices complying to national regulations (e.g. BZT approval in Germany) are to
be installed;
▪
The equipment must be installed as a fixed installation.
▪
The use of portable or mobile devices inside the vehicle is permissible only via a connection to
the permanently installed outside antenna;
▪
The transmitting part must be spatially separated from the vehicle's electronic system.
▪
When attaching the antenna, pay attention to proper installation, including a sound ground
connection between the antenna and the vehicle's ground wire.
For information on wiring and installation as well as the maximum allowable current consumption,
please also refer to the installation guide provided by the machine manufacturer.
EU declaration of conformity
Herewith we declare that the design and construction of this product and its identical variants, as well
as the form brought onto the market by us, is in accordance with the relevant safety and health
requirements of the EU Directive of Electromagnetic Compatibility 2014/30/EU. If alterations are
made to the product without prior consultations with us, this declaration becomes invalid.
TOUCH800®
Harmonised standards applied:
EN ISO 14982:2009
(EMC Directive 2014/30/EU)
User responsibility
Additional requirements
1.6
