ISOBUS-TC task processing
Configuring ISOBUS-TC
10
31302713-02-EN
V5.20170221
63
ISOBUS-TC task processing
The ISOBUS-TC application has two jobs:
▪ As
Task Controller
, the application controls all of the relevant data between the terminal and
other implements that are connected to the ISOBUS or terminal (Part 11 of the standard
ISO11783).
▪ As
Task Manager
, the application enables the creation and editing of ISO-XML tasks. This also
enables communication with Farm Management Information Systems (Part 10 of the standard
ISO11783).
ISOBUS-TC as Task Controller
The jobs performed by the application depend on how the "Operating Mode" parameter is configured.
▪ "
Standard
" - Only the Task-Controller jobs
▪ "
Extended
" - Task-Controller and Task-Manager jobs
Configuring ISOBUS-TC
The "farmpilot" parameter
This parameter shows the status of the connection to the "farmpilot" portal.
“Operating Mode” parameter
With this parameter, you can set whether the Task Controller of ISOBUS-TC should work in the
background or if you want to work actively with ISO-XML tasks.
▪ "
Standard
" - Two working methods are possible here.
Working method 1:
– All task data is managed through the "TRACK-Leader" app.
– In ISOBUS-TC, you cannot create any tasks.
– In this operating mode, ISOBUS-TC works in the background.
Working method 2:
– You can load field data from a shape file (field boundaries, guidance lines) in ISOBUS-TC.
This field data is made available in the "TRACK-Leader" app. Also possible without an
ISOBUS-TC license.
10
10.1
10.1.1
10.1.2
