Connecting the basic vehicle harness
3
V1.20200518
7
Connecting the basic vehicle harness
Distribution unit
Prepared fuse holder with 20 A fuse
Prepared fuse holder with 7.5 A fuse
16-pin AMP connector for connection to
the job computer (cable length 2.5 m or
10 m)
3-pin implement connector for the
connection in the vehicle cab (cable
length 5.5 m)
9-pin CPC connector for connection to
the terminal (cable length 6 m)
The vehicle is switched off.
1.
Fasten the distribution unit at a position in the vehicle from which you can easily reach the other
connections.
2.
Connect the CPC connector to the terminal.
3.
Connect the AMP connector to the connection on the job computer.
4.
Connect the implement connector to the connection in the vehicle cab.
5.
Fasten all cables with cable ties. You may not shorten the cables. When fastening, pay attention
to sufficient distance from moving parts and parts that get very hot.
3