Mullen D-10, Руководство пользователя, Страница: 11 / 20

11
Adjusting Half Stop
2nd string half stop adjustment .
When assembling new guitars this is the proce-
dure we use to adjust the 2nd string half stop.
We use the 9th string for two purposes. The
first, of course, is for the 2nd string half stop
and the second is for the D to C# change on the
9th string. To make this work properly
use the following method.
Make sure that the pulling rods are in the
same holes in the bell crank and the changer
(this should be the 5th hole, the one that is
the the fifth hole from the guitar body) Temper
tune the open E9th tuning first and then tune
with the B pedal G# to A down. Next temper
tune the 9th string to C# with 6th string, hav-
ing the B pedal down. When the 9th string en-
gages, making contact with the changer lower-
ing lever, this will apply extra pressure to the
feel on the knee lever this becomes the half
stop feel for the 2nd string . After this proce-
dure it should be in tune at this time. We also
have available a tunable half stop, which is
tunable from under the guitar, and also you
can adjust the tension For more information on
this product E-mail Mullen Guitars .
If you have trouble you may email.