09
(Figure D)
(Figure E)
( Figure E )
5. Turn on the power, HDD will begin to spin up.
6. Connect the USB cable to the USB port on the
PC. Once connected properly, the HDD should
be automatically detected and be ready for use.
( Figure D )
SATA/IDE to USB 3.0 Adapter
1. Keep the HDD in a flat position when being used.
2. Make sure Power Adapter Switch has been turned
off before disconnecting the HDD from the Power
Cable.
3. Do NOT touch PCB of the HDD when it is power-on.
4. Never remove, shake or flap the HDD when hard
drive is in use.
NOTE :
OFF
ON
SAT
A
S
AT
A
SAT
A
SA
TA 2.5” & 3.5
” HDD
