INSTRUCTION
- Timer [6~30min.]
- Frequency : 40KHz
- Temperature[30~85C]
- Stainless body and tub.
Ultrasonic cleaner, Cover, Manual, Fuse( 5Ax2 )
Ultrasonic Cleaner uses for cleaning the various kinds of dirts like finger marks or oils on
the surface located in the irregular narrow spaces at the corner. Built in timer functions
(6~30min.) and heat-on functions(30C~85C) to maximize the efficiency of cleaning.
1. Specifications
2. Name / Function of parts
3. Parts
SPECIFCATIONS
NOTE
2 kinds of cleaning method allowed for option before installation.
Direct Cleaning : operate the device after you add items and liquid
in the tub at the same time.
Indirect Cleaning : First you add items in the baker with liquid then move to the tub.
(This is normally used for the acid or other corrosive solutions.)
1. Do not impact the device or drop from the high place.
2. Keep max. operation time (30min.)
*Stop for the break time 5min. after 30min.
3. Do not operate the device without the liquid.
4. Do not use highly inflammable/acid liquid
.
4. Before Installation
Model
Model
Operation
Materials
Voltage
Gross
weight
Current
Capacity
Inside-diameter
( W x L x H )
Outside-diameter
( W x L x H )
Frequency
Ultrasonic
output
SD-200H
6~30min
AC220V / 60Hz
(30~85 C)+/- 10%
[SUS-304]
[SUS-430]
40KHz
3.3L
100W
1.41A
4.2Kg
240 x 140 x 100
300 x 166 x 250
SD-250H
SD-200H
SD-250H
40KHz
6L
150W
1.56A
5.6Kg
290 x 150 x 150
350 x 176 x 300
Timer for
ultrasonic
operation
(6~30min.)
Lamp for ultrasonic
stop operation
Temperature controller
(30~85C)
Lamp for ultrasonic operation
(on/off)
Thermostat lamp (on/off)
