Muji AD-SD1-SG, Руководство пользователя

Страница: 21 / 48

-20-
No power.
The product won't
turn on, or it turns
on for a short time,
then turns off.
■
Is there enough water in the water tank?
→
Fill the tank up to 100ml (full) with water.
Pushing the mist switch when there is no water or when the
water level is low will result in an electronic beep, after which the
diffuser will shut off.
■
Is the AC adapter correctly connected?
→
Check if the AC adapter is connected to the diffuser unit and the
electrical outlet.
To be sure, remove the DC plug from the diffuser unit and
reinsert before checking operations.
Troubleshooting
Check the following if the product appears to be broken or operating abnormally.
Disposal
●
Dispose of this product and packaging materials in accordance with your local regulations.
No mist is emitted.
Mist emits weakly.
Too much mist is
emitted.
It turns off sooner.
■
Is there enough water in the water tank?
→
Fill the tank up to 100ml (full) with water.
* Water level in the water tank will decrease the closer to the end of
the timed session.
Accordingly, mist volume may decrease; however, this is not a
malfunction.
■
Is there too much water in the water tank?
→
Mist will not operate normally if the tank is overfilled (more than 100ml).
■
Is the ultrasonic diaphragm dirty?
→
Turn the power off, and then use a cotton swab or similar to
gently clean any bubbles adhering to the ultrasonic diaphragm.