M0588.docx | Rev 1.5 | Modified on 12/11/2018 | © Remote Control Technologies Pty Ltd
7 | 28
Product Overview
Figure 1 Programmable lubrication controller
The Muirhead
®
Programmable Lubrication Controller, part number 9252, is designed for flexibility and is used
to automate the grease injection system on a machine.
The programmable lubrication (lube) controller is capable of operating in many different modes to suit multiple
lubrication systems available on the market. In the standard pump solenoid valve pressure switch
arrangement, the system can be programmed so that the pump can act as a reciprocating pump where it
requires a pulse circuit or it can just switch a pump on. The system provides the option to use a pressure
switch. The pause and pump periods can be adjusted from 0.5 seconds to up to 24 hours. It can also be easily
configured to act as a swap version where it activates a lube cycle on one bank for a period, then swaps over
and operates a second bank with full pressure switch monitoring.
The system has many diagnostic capabilities and when connected to the custom software package, the
complete system can be monitored.
Features and Functions
■
Pressure switch monitoring
■
Pulse or continuous pump
■
Adjustable pause and pump periods from 0.5 seconds to 24 hours
■
Swap between banks
■
Manual pump mode
■
Grease low level indication
■
Customised software
■
Inbuilt diagnostics
■
12 or 24 volt machines
■
Suits various lubrication systems
■
Fully software configurable to suit all machine types
■
One panel to suit all machines on site
■
Modular design
■
Internal alarm