USE
TO OEPN THE LID, ACCORDING TO THE MODEL
Hinged lid: press if necessary on the locking system and pull backwards.
Assisted opening lid: press on the locking system and the lid lifts automatically
Automatic opening lid: press the button at the top of the handle
Lockable lid: turn the lid the left to unlock it and lift it.
To close the lid, press it down firmly or turn it to the right in the case of the lockable lid.
PLACE THE BASE ON A FLAT, STABLE, HEAT-RESISTANT SURFACE AWAY FROM
WATER SPLASHES AND ANY SOURCES OF HEAT.
Your kettle mus only be used with the base that matches it and its own anti-scale filter.
FILL THE KETTLE WITH THE DESIRED AMOUNT OF WATER
You can fill it through the spout, which ensures better maintenance of the filter. As a
minimum, cover the element (or the bottom of the kettle) with water.
Never fill the kettle when it is on its base.
Do not fill it above the maximum level, or below the minimum level. If the kettle is
too full, boiling water may spill out.
Do not use without water.
Check that the lid is closed properly before use.
The kettle must always be used with its own filter.
POSITION THE KETTLE ON ITS BASE. PLUG IT INTO THE MAINS SOCKET.
FOR KETTLE THAT FEATURE A TEMPERATURE SWITCH, SELECT THE TEMPERATURE
ACCORDING TO YOUR NEEDS.
TO START THE KETTLE
Press the on/off button positioned on the top or the bottom of the handle according
to the model.
FOR KETTLES THAT FEATURE A TEMPERATURE SWITCH
If you move quickly from position 1 to position 2 after heating the water, the kettle
has to reinitialise. If you think that this is taking a long time, you can add cold water
to speed up the start of heating.
•
•
•
•
•
•
•
•
•
•
•
•
1
2
3
4
5
6
7
THE KETTLE MAY HAVE AN INTERNAL LIGHT, DEPENDING ON MODEL
8
